During our Summer of Sewing series, we'll be featuring weekly tutorials using our new fabric collections (and giveaways, too!). Join us each week, sit back, relax, and then start sewing!
This week we're featuring the fun children's collection, Building 101. Plenty of construction equipment and tools for all those future builders!
We used the Building 101 fabrics to make a Car Carry-All that has four rows of pockets. This helps keep all those toys, books, snacks and who-knows-what-else organized on car trips. Simply attach it to the back of the car's front seat, stuff with supplies, and go!
You'll Need:
1 fat quarter each patchwork print, blue tool print, blue construction print, cream tool print, and kid print
2/3 yard blue tonal print
1/2 yard medium weight fusible interfacing
1/2 yard Peltex One-Sided Fusible Firm Stabilizer
10" of 1" wide Velcro
Cutting:
From the patchwork print:
(1) 13" x 16-1/2" print (with motifs running lengthwise)
From the blue tool print:
(1) 11" x 16-1/2" print
From the blue construction print:
(1) 11" x 16-1/2" print (with motifs running lengthwise)
From the cream tool print:
(1) 7-1/2" x 16-1/2" piece
From the orange tonal:
(4) 1-3/4" x 16-1/2" strips
From the blue tonal:
(1) 16-1/2" x 19-1/2" piece
(2) 2" x 42" strips
(2) 4" x 9" strips
From the interfacing:
(1) 6-1/4" x 16-1/2" piece
(2) 5-1/2" x 16-1/2" pieces
(1) 3-3/4" x 16-1/2" piece
From the Peltex:
(1) 16" x 19" piece
From the Velcro:
(2) 5" lengths
Make the Carry-All:
Step 1: Fold the 13" x 16-1/2" patchwork print piece in half wrong sides together to it measures 6-1/2" x 16-1/2". Press. Slide the 6-1/4" x 16-1/2" interfacing piece in between and fuse to secure.
Step 2: Fold (1) 1-3/4" x 16-1/2" orange tonal strip in half lengthwise, wrong sides together, and press. Unfold and then fold and press each long edge in to the center fold line.
Step 3: Tuck the folded edge of the patchwork print piece in to the center fold of the orange strip. Pin in place and topstitch to secure.
Step 4: In the same way, make the (3) remaining pockets.
Step 5: Center and fuse the Peltex piece to the wrong side of the 16-1/2" x 19-1/2" blue tonal piece.
Step 6: Measure down 6" from top edge of the background piece and draw a horizontal line. Position the cream tools pocket face down, matching the raw edges to the marked line. Stitch using a 1/4" seam allowance.
Step 7: Fold the pocket up and press firmly. Measure and mark a vertical line at the center point of the pocket. Stitch to secure, backstitching several times at the top and bottom of the pocket. This divides the pocket into (2) separate sections.
Step 8: In the same way, measure and draw a line 10" down from the top edge. Position the blue construction pocket along the bottom of the drawn line (Note: Because this is directional fabric, make sure your pocket is oriented so the fabric is right side up.). Stitch.
Step 9: Press the pocket up and then mark and stitch a center line to divide the pocket into two sections.
Step 10: In the same way, measure 14" down from the top edge and draw a line. Position the blue tool pocket along the bottom of the drawn line. Stitch.
Step 11: Press the pocket up. Mark vertical lines on the pocket 5-1/2" from both outside edges. Stitch to create three pocket sections.
Step 12: Position the last pocket along the bottom edge of the background fabric and baste the bottom edge to secure.
Step 13: In the same way as in Step 2, fold each 2" x 42" blue tonal strip and each 4" x 9" blue tonal strip lengthwise in half, and then fold the long edges into the center. Refold along the original line. On each strip, fold and press one short end in to create a finished end. Topstitch each strip to secure the folded edges. Stitch a 3-4" piece of Velcro to the finished end of each strip. (Note: You will need to trim the width of the Velcro for the skinnier strips.)
Step 14: Trim the skinner strips as needed. Note: Ours are trimmed to 22" and fit well on a typical sedan seat. You may want to measure around your seat before trimming. The strap can be tucked into the crack between the back and the base of the seat.
Step 15: Pin the shorter strips to the top edge of the background piece, approximately 5" in from each side. Position one strap with the Velcro face up and one face down. Pin the longer skinny strips on each side, 2" from the bottom corners. Position the strips with one Velcro piece face up and one face down.
Step 16: Lay the 16-1/2" x 19-1/2" backing piece face down on top and stitch around all four edges, leaving a 14" opening on the bottom for turning. Try to stitch just outside the Peltex edge. Backstitch over the ends of the four strips to add extra security.
Step 17: Turn the piece right side out and press. Press the raw edges of the opening in. Topstitch around the entire carry-all, which will close the opening. Your carry-all is done and ready to use!
In the car, ready to fill!
Want to win a FQ Bundle of Building 101? Leave a comment below or on IG and tell us your go-to car snack! Giveaway is open through Monday, September 4th at 11:59 PM CDT.
See the entire Building 101 collection here and ask for it at your local quilt shop.
Follow along with our Summer of Sewing Series!
Click here to see all the tutorials.
Thoroughly Modern winner:
Chiska
